PiezoBarrel P7 Pickup Microphone & 4 meter Cable with Fittings for Alto Sax

April 6, 2023admin0 comments

PiezoBarrel P7 Pickup Microphone & 4 meter Cable with Fittings for Alto Sax

Mouthpieces and necks shown are only used to show how the supplied adapters may be installed. The P7 is brighter in sound than the PiezoBarrel’Wood’ and provides a warm sax sound. 4m long 3.5mm to 6.3mm shielded cable to plug in to standard 6.3mm (1/4 inch) line or instrument socket. Small Phillips screwdriver to adjust output level (sometimes needed for wireless mic systems which need a very small signal). Blocking screws with O rings. Compatible with a variety of instruments including other brass and wind instruments. High signal to noise ratio. Does not require pre-amplifier. Output voltage is adjustable between almost zero and full output voltage so it will work with devices expecting small microphone level signals. Suitable for use with Guitar and instrument (Line Level) inputs (or Mic level inputs using output voltage adjustment or a DI box). Can be connected directly to mixers, recorders or guitar amplifiers as well as standard Guitar effect pedals and loop stations. Reproduces the natural sound of the instrument. This item is in the category “Musical Instruments\Pro Audio\Microphones & Wireless Systems”. The seller is “safron60″ and is located in this country: AU. This item can be shipped worldwide.

MPN: P7
Suitable For: Live performance, recording and glitch free effect
Brand: PiezoBarrel
Connector(s): 3.5 mm (1/8 in) TS (Mono)
Form Factor: Piezo/Crystal Microphone
Type: Piezo/Crystal Microphone
Mount Type: Fittings Supplied
Polar Pattern: Direct (air pressure – not contact)
Model: PiezoBarrel P7
Instrument: Saxophones
Connectivity: 6.35 mm (1/4 in) TS, Wired
Features: Designed for use with effect pedals, Low feedback and spill, No preamp required, No batteries or power needed, Adjustable Gain
Country/Region of Manufacture: Australia

Comments

Comments are closed.